Lightweight Electric Pipe Cutting And Beveling Machine Stable Performance

Split Frame Machine

Product Introduction

SFM series are portable processing equipment for cutting, beveling and end prefabrication of various pipes, with which cutting and beveling can be conducted at the same time. The SFM Series manufactured by Bohyar cuts and bevels the pipe end or middle of pipe by clamping external wall, with processing diameter up to 2100 mm and maximum wall thickness of 100 mm. With an R&D history of nearly one hundred years, the product can process pipes or casings accurately, continuously and vertically.

Industry Application

The SFM Series of Pipe Cutting and Beveling Machines are widely used in long-distance transport pipeline, power plant, nuclear power, petroleum, chemical engineering, natural gas, boiler shop, pharmacy, pipe prefabrication plant, pipeline installation engineering, rush-repair work, etc. Our products play an important role in these fields.

Safety Instructions

■ Do not get close to the running machine to avoid personal injury caused by the sucking of hand and clothes by the machine;

■ During the proper operation of machine, the operator shall stand in the suitable position to avoid being scratched, scalded by the cuttings;

■ When the cutter head is rotating, the operator is forbidden to get close to the tool with hand to avoid being cut.

Routine Maintenance

Timely maintenance can extend the life of the machine and make the machine process high-quality bevel. Therefore, keeping good using and maintenance habits are strongly recommended in the daily use.

■ Maintenance and repair must be conducted by professionals.

■ To ensure sound operation of the equipment, using original parts is suggested.

Note: Make sure the equipment is disconnected from power before maintenance.

Report on Comparison of Product Advantages

electric pipe cutting machine

electric pipe cutter

Lightweight Electric Pipe Cutting And Beveling Machine Stable Performance Images